External Horn

External Horn

To sound a horn or buzzer tone as required by several events, the Polaris timer console provides a direct audio connection into your PA system (sound system) so that the horn tone will sound over the speakers in your arena. However, if you cannot connect to a sound system, the external horn can be used to generate a loud horn tone without a sound system.

Ordering Information

The external horn includes an 8 foot A/C power cord and a 25 foot data cord which runs back to the timer console in the announcer's booth. The external horn is required only if you are not able to connect to your PA system (sound system) with one of our horn audio cables (see below).

External Horn
If you are not able to connect to a sound system for sounding the horn or other tones, the external horn can be connected to your timer instead. The horn is very loud and requires no additional amplification.
$149
Timer to PA Horn Cable (line level)
The line level horn cable plugs into an RCA phono-jack on your PA system ("Aux", "CD In", "Tape In", "Left", "Right", etc.). Note: This cable is typically included with most timing system. You may not need to order it here.
$10
Timer to PA Horn Cable (microphone level)
The microphone level cable plugs into a 1/4" high-impedance microphone jack which is present on most PA systems.
$15